Self Aligning Ball Bearings

Contact Now

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

85 mm x 150 mm x 36 mm ISO 2217K self aligning ball bearings

Bearings M06110
0888569044389 N/A

50,8 mm x 101,6 mm x 20,6375 mm RHP NLJ2 self aligning ball bearings

50 mm 1.4
5.28 Hz 35.25 mm

65 mm x 140 mm x 48 mm NTN 2313S self aligning ball bearings

5,100 rpm SNR
59.4 kN 108 mm

45 mm x 100 mm x 36 mm NKE 2309-K+H2309 self aligning ball bearings

N/A FAG BEARING
SCHAEFFLER GROUP 0.038

50 mm x 75 mm x 35 mm ISB GE 50 BBL self aligning ball bearings

0.0 Mounted Units &
LINK BELT REXNORD

25 mm x 62 mm x 17 mm SKF 1305EKTN9 self aligning ball bearings

N/A Bearings
BEARINGS LIMITED BEARINGS LIMITED

20 mm x 52 mm x 15 mm NSK 1304 K self aligning ball bearings

0.0 SEALMASTER
0.036 31171508

75,000 mm x 130,000 mm x 25,000 mm SNR 1215 self aligning ball bearings

0 N/A
0.0 B04334

100 mm x 180 mm x 46 mm NTN 2220SK self aligning ball bearings

0.0 N/A
0 0800675208523

100 mm x 215 mm x 73 mm FAG 2320-M self aligning ball bearings

31171504 Single Row Ball Bear
0.0 0.06

65,000 mm x 140,000 mm x 48,000 mm SNR 2313K self aligning ball bearings

Set Screw 3 Bolt Flange Bracke
Yes Flanged
1/18